Automatic smart lock, be sure to see the ten questions ten answers

01. What is a fully automatic Smart Lock?
A: Automatic intelligent lock is a kind of electronic lock that can realize the automatic retracement of the lock latch after the verification of identity, and the lock is automatically locked after the door is closed.

02. What is the difference between automatic smart lock and semi-automatic lock?
The semi-automatic intelligent lock opens the lock through manual intervention of the mechanical structure, while the fully automatic intelligent lock uses the motor to drive the whole process.
In terms of appearance, automatic smart locks are mostly push-pull styles, and semi-automatic smart locks are mostly handle types.
In terms of opening and closing the door, the automatic smart lock can automatically open the lock after verifying the identity, and the semi-automatic smart lock needs to press the handle; After closing the door, the automatic smart lock can be automatically locked, and the semi-automatic smart lock needs to lift the handle and lock.
In terms of the lock body, the automatic lock body is equipped with an induction lock tongue, which can detect the lock status after closing the door, and the semi-automatic intelligent lock has no induction lock tongue.

03. What are the main types of automatic smart locks? The first type is the automatic intelligent lock whose motor is placed on the front and back panels; The second type is the automatic intelligent lock with electronic lock body.

04. Which lock body can fully automatic intelligent lock adapt?
The rear clutch automatic intelligent lock can be adapted to the standard, overlord, non-standard lock body, etc., if the motor torque is enough, you can hang the hook.
Electric lock body automatic intelligent lock is generally adapted to the standard lock body, 30*240, 40*388, etc., you need to rely on the guide piece installation, and generally can not hang the hook.

05. What kind of doors can be equipped with automatic locks?
There are many kinds of lock body specifications, the same smart lock will consider most of the lock body specifications on the market and design, in general, most doors (door body thickness is greater than 40mm) can be installed smart Door Locks, can also be installed automatic smart locks, unless a few special or foreign lock bodies, but can also be installed in place by changing the door hole.

06. Do you need to remove the hook to install the automatic lock? It is recommended to remove the hook.
In the early days, the community security level was low, thieves were prevalent, in order to prevent thieves from violently dismantling, so there was a heaven and earth hook. At present, the cases of illegal entry through breaking the door have become less and less, according to a group of public security statistics published by Changsha Evening News in 2017: in all kinds of burglary, the proportion of violent unlocking is less than 1%, and the heaven and earth hook has basically been in vain. At the same time, most smart locks have anti-skid alarm, remote monitoring and other functions, and users do not have to worry about the security of the door lock in the household scene.
An entry door suitable for a family must have anti-theft performance and fire performance, and the existence of the heaven and earth hook makes the fire performance and anti-theft performance of the door contradictory.

From the point of view of fire resistance, the entrance door equipped with a heaven and earth hook can not pass the fire acceptance. Because according to the "Building design fire Code", the fire door is required to escape, the door can be opened quickly in a crisis situation, there can be no obstruction, but whether the straight tongue lock or the hook lock requires a key or knob operation, so it does not meet the escape requirements. In addition, in the case of a fire in the house, firefighters will use violence to open the door in an emergency, but they are often caught by the hook of heaven and earth, thus losing the best time to save people. Therefore, from the point of view of fire protection, the heaven and earth hook has lost the safety effect. In summary, it is recommended to remove the hook when installing the automatic lock.

07. What should we pay attention to when using automatic smart lock?
When opening and closing the door, do not slam the door hard, which will cause impact on the door frame, resulting in deformation of the door frame, and eventually lead to the lock tongue can not smoothly enter the door frame and cannot be locked. In addition, this practice will also cause the lock body to move, in this case the door can extend the lock tongue, but it is easy to not recover the lock tongue when opening the door. If it is a rear-clutch automatic lock, it is recommended not to open the automatic lock.

08. What are the maintenance methods of automatic lock?
When the battery of the smart door lock is low, replace it. When the fingerprint collector is wet or dirt, it should be gently wiped with a dry soft cloth to avoid scratches and affect fingerprint collection. Do not use alcohol, gasoline, diluent or other flammable substances for cleaning or maintenance. When the mechanical key is not smooth, put a little graphite powder or pencil powder into the slot of the lock core to ensure that the key can open the door normally. Do not make the lock face contact with corrosive substances. Do not hit or knock the shell with hard objects to prevent damage to the surface coating, or indirectly affect the internal electronic part of the fingerprint lock. We must give ❺ schemes frequent checks. The door lock should be used every day, it is recommended to check once a year or half a year, and check whether the battery leaks, and whether the fastening screws are loose to ensure fastening; The matching gap between the lock body and the locking plate...... Precision and complex electronic components are basically built into the intelligent lock. When disassembled by non-professionals, the internal accessories may be damaged or other serious consequences may be caused. If you suspect that there is a problem with the fingerprint lock, it is best to consult a professional after sale. If the automatic lock uses a lithium battery, do not charge the lock directly with a charging treasure, which can easily lead to battery aging, and even an explosion in severe cases.

09. What are the common faults of automatic intelligent lock?
Since the automatic smart lock is installed on the door, there is an established operating track, and once the track is deviated, it will cause the door lock to fail. There are many reasons for the deviation of the operating track, including the installation is not in place, the lock body is rusty for a long time, the door body is sinking, and the user is forced to open the door without fully retracting the inclined tongue during use.
Specifically, the common fault problems of automatic intelligent lock include: fast power consumption, breaking of the gear of the push and pull box, outdoor failure to lift the electronic anti-lock, and the lock body is stuck.

10. When buying automatic smart lock, what should we pay attention to?
When choosing a smart door lock, choose a product that suits you, instead of blindly pursuing various unique functions and unlocking methods. Focus on product safety and high quality materials; They should buy smart door lock products through formal channels, and carefully check whether the product packaging is clear and clear, whether it has a certificate, manual, warranty card, etc. First confirm whether there is a hook in your home, generally when installing automatic smart locks, it is best to remove the hook to prevent the smart lock from consuming too much power. After confirming whether there is a heaven and earth hook, timely communicate with the store or online customer service; ❺ Consider whether we care about unlocking noise. If we don't care about the sound factor, we can choose the rear clutch automatic. If we care, we recommend considering the automatic lock with built-in motor, which has relatively small sound.